This is the new Tamiya 1:12 scale model of the also-new Honda Monkey 125. The new Honda was released in 2018 as a 2019 model, evoking the styling of the much loved Honda “Monkey” Z50 series from the ’60s and ’70s. The new Honda Monkey 125 is designed for adults, though it’s obviously smaller…
This is a Russian submarine clock that is believed to have been in service during the Cold War, a time when submarines were an utterly vital means of defence, offence, and intelligence gathering for the USA and the Soviet Union, as well as the United Kingdom, France, and to a lesser extent Canada and Australia….
The Bolt Action Pen L by the team at Inventery was developed to be a long-lasting heirloom quality pen that can be handed down through multiple generations. Most pens, even those from high-end manufacturers, have plastic internal mechanisms prone to breaking and weakening with age. The Bolt Action Pen is precision machined from raw brass stock using…
The Pendulux Altimeter Table Clock looks like it was pulled from the cockpit of a military surplus B-17 bomber in the years after WW2, but in reality it’s a brand new clock made from cast aluminium alloy, brass, and glass. With a hefty weight of 1.6 lbs, the Pendulux clock isn’t a lightweight. The team…
The new Lego Ford Mustang model features 1,471 parts and measures in at 3” (10 cm) high, 13” (34cm) long and 5” (14 cm) wide. It can be built in a number of different ways including with an optional supercharger, side exhausts, a boot lid spoiler, and even with a nitrous tank in the trunk….
This Land Rover Defender 1:10 scale remote control model from Tamiya sits on a full four-wheel drive chassis with lockable differentials, oil-filled coil over dampers on all four corners, a live rear axle, and independent front suspension. The Land Rover Defender is a 4×4 that needs no introduction, it’s a descendant of the original Series…
The Wilesco Steam Locomobile D430 is a fully-functioning steam traction engine model that can drive under its own power for as long as the fuel source lasts. The boiler is 120mm long and 55mm in diameter, it has a sight glass allowing you to check the remaining water level, and a safety valve to stop…
The original Petromax lantern was designed in 1910 in Germany by Max Graetz, the name of the lantern is a combination of “petrol” and “Max” a reference to its fuel source and its creator. Graetz developed the lantern based on principles that were already well-understood at the time, he differentiated his lantern from its competitors by…
The EcoFlow Portable 50W Solar Panel was designed to provide a miniature mobile power station for use when you’re off the grid and hundreds of miles from the nearest power outlet. It folds open to expose twin solar panels with a combined output of up to 50 Watts, it offers both two USB outputs at…
This is a rear wing element from Michael Schumacher’s Benetton B194 Formula 1 car, it was dislodged in an accident during qualifying for the 1994 Australian Grand Prix. This would be an eventful race for Schumacher, he was almost tied in the championship standings with British driver Damon Hill. As this was the final race of…
Each True North Spin Coin is manually machined by hand from solid brass by members of the Lawson family, proprietors of the family-owned and operated J. L. Lawson & Co. in California. In many respects spin coins were the original fidget spinners, you keep one on your desk and spin it when you’re thinking or…
The We Went Fast Christmas tree ornament doubles up as a bottle opener to ensure that it’s the only piece of Christmas decoration that you can actually use for the other 11 months of the year. Each one is cut from 1/8″ stainless steel by legendary custom car and motorcycle builder Bryan Fuller using a…
