Italy’s “Forgotten Ford” – The Unusual OSI 20M TS
This is one of the original examples of the OSI 20M TS from 1968. It was a car designed in Italy and built on the platform of the European-designed Ford Taunus 20M, with a…
This is one of the original examples of the OSI 20M TS from 1968. It was a car designed in Italy and built on the platform of the European-designed Ford Taunus 20M, with a…
This is a Dino 246 engine, a Ferrari-designed 2.4 liter 65º V6 with double overhead cams, triple Weber 40DCNF13 carburetors, and an iron block with lightweight aluminum alloy heads. Versions of this engine were…
This is the 1973 Chevrolet Caprice Convertible that was gifted to Hunter S. Thompson in 1990, and then kept by him until his death in 2005. The car featured heavily in the 1998 film…
This is the Chore Coat by Randy’s Garments, each one is made from 12 oz 100% cotton scoured indigo denim with bar-tack reinforcements at all stress points, and heavy-duty 20L nickel tack buttons. The…
This is a 1981 GMC Vandura powered by a 5.0 liter V8. It was recently restored to a cost of over $20,000 USD, and it’s now finished in “A-Team” specification, with the classic paint…
This is a Hispano-Suiza 12XCRS V12 engine from 1935, it has a displacement of 27 liters and an output of 690 bhp – this was an astonishing figure for an engine at the time,…
This is a 1993 Geo Tracker 4×4, it’s the upmarket LSi version with the 5-speed manual transmission. This Tracker is a little bit special thanks to the fact that it’s been fitted with a…
This is the Alaska Wall Tent by the Alaska Gear Company, each one is made in the United States from Sunforger 13oz DLX, a double-filled, pre-shrunk, marine-grade canvas ideal for longterm outdoor use. The…
This is the Sbarro Alcador GTB from 2009, it’s a car you may never have seen before as only one was ever made to this specification, and it’s based on the underpinnings of the…
This is the Modello Uno U1S-PD6-RB ProDiver, it’s a limited edition watch from the wildly popular microbrand, and each one is made in Italy with a Swiss automatic movement. The Unimatic ProDiver series is…
This is a 1951 Muntz Jet that is now powered by a Chevrolet 350 small block V8, offering vastly more power than the original 160 bhp power unit supplied by the likes of Cadillac…
This is the MetMo Edge, it’s arguably one of the most convenient box cutters and package openers money can buy, largely due to the fact that it’s so tiny it sits on a keychain….