A 360 BHP “Nailhead” V8 1965 Buick Riviera GS
This is a 1965 Buick Riviera GS, its restoration was completed in 2017, and it still retains its matching numbers 425 cubic inch, 360 bhp “Nailhead” V8 putting out 465 lb ft of torque….
This is a 1965 Buick Riviera GS, its restoration was completed in 2017, and it still retains its matching numbers 425 cubic inch, 360 bhp “Nailhead” V8 putting out 465 lb ft of torque….
This is 1993 Corvette ZR1 LT-5 V8 that has remained on its factory shipping pallet since new, having never been fitted to a car or used. The LT-5 was a 5.7 liter V8 developed…
This is a 1987 Ford LTD Crown Victoria Station Wagon that was converted into a convincing “Family Truckster” replica, after the car used in the legendary 1983 comedy film National Lampoon’s Vacation starring Chevy…
This is the 1960s-era Rickenbacker electric guitar that was played by John Lennon during the band’s residency at London’s Hammersmith Odeon in December and January of 1964. Lennon would later gift it to Ringo…
This is one of the original examples of the OSI 20M TS from 1968. It was a car designed in Italy and built on the platform of the European-designed Ford Taunus 20M, with a…
This is a Dino 246 engine, a Ferrari-designed 2.4 liter 65º V6 with double overhead cams, triple Weber 40DCNF13 carburetors, and an iron block with lightweight aluminum alloy heads. Versions of this engine were…
This is the 1973 Chevrolet Caprice Convertible that was gifted to Hunter S. Thompson in 1990, and then kept by him until his death in 2005. The car featured heavily in the 1998 film…
This is the Chore Coat by Randy’s Garments, each one is made from 12 oz 100% cotton scoured indigo denim with bar-tack reinforcements at all stress points, and heavy-duty 20L nickel tack buttons. The…
This is a 1981 GMC Vandura powered by a 5.0 liter V8. It was recently restored to a cost of over $20,000 USD, and it’s now finished in “A-Team” specification, with the classic paint…
This is a Hispano-Suiza 12XCRS V12 engine from 1935, it has a displacement of 27 liters and an output of 690 bhp – this was an astonishing figure for an engine at the time,…
This is a 1993 Geo Tracker 4×4, it’s the upmarket LSi version with the 5-speed manual transmission. This Tracker is a little bit special thanks to the fact that it’s been fitted with a…
This is the Alaska Wall Tent by the Alaska Gear Company, each one is made in the United States from Sunforger 13oz DLX, a double-filled, pre-shrunk, marine-grade canvas ideal for longterm outdoor use. The…